The rotary tables of our EDH-series have become an important key element for highly flexible automation applications. In contrast to our fixed-position EDX-series rotary tables, the flexible rotary tables are always equipped with an index cam with a constant pitch: resulting in an unchanged reduction ratio between the motor and the turntable plate. The partition is exclusively determined by the correspondence control unit of the servomotor.
The EDH-series can be adapted to almost any load by individual programming. In this case, the flexible servo geared motor not only enables the free setting of the output angle, but also an optimized acceleration response for the particular load.
Being flexible in use, the rotary tables of this type are particularly suitable for drive tasks in which the movement sequence has to be adapted in the production process, for example by new loads, new positions/end positions or travel directions. A typical example is the production of different vehicles on a production line, which makes flexible modification necessary in the production cycle.
The perfect media transmission solution for continuous rotating indexers is the EXPERT-TÜNKERS Slip Ring ETSR.
Advantages of the EDH-Series
- Individual positioning by servo-technology
- Higher torque due to multi-cam-follower principle
- Optimal distribution of braking forces in case of emergency stop
- Optimized design leading to higher torques at identical dimensions
- Maintenance friendly - Cam follower exchange without tooling removal
EDH | Technical Specifications
|EDH 610||360 mm||190 mm||2.200 kg|
|EDH 700||450 mm||240 mm||6.000 kg|
|EDH 810||560 mm||280 mm||8.000 kg|
|EDH 960||710 mm||310 mm||10.000 kg|
|EDH 1070||820 mm||340 mm||11.000 kg|
|EDH 1170||920 mm||360 mm||13.000 kg|
|EDH 1270||1.020 mm||410 mm||19.000 kg|
|EDH 1370||1.120 mm||420 mm||22.000 kg|
|EDH 1600||1.350 mm||480 mm||26.000 kg|
|EDH 2050||1.800 mm||480 mm||37.000 kg|
|EDH 2550||2.300 mm||450 mm||47.000 kg|
|EDH 3250||3.000 mm||600 mm||64.000 kg|