When quick response is vital.
Your direct way to us!
Tel.: +49 (0) 6251 / 592 0
The rotary tables of our new EDC-series are an evolution of our proven EDH-series and a direct response to our future customer's needs. Continuously advancing customer loads combined with shortened cycle times demand a new type of product. Due to the increasing complexity of automation layouts, the available space for our products becomes scarce. This development makes an increase in power density inevitably. EXPERT-TÜNKERS wants to face these new developments with its new flexible double cam rotary table of the EDC-series. In direct comparison to an identically sized rotary table of the conventional EDH-series, the double cam design produces almost double the output torque.
The new EDC-series is based on the same design as the EDH-series and supplemented by a second cam drive. Since the mechanical gearbox for the cam synchronization is already integrated into the rotary table's design, only a servo-motor for the plug&play connector is required. The servomotor can not only be replaced faster during maintenance, but also individually positioned according to customer requirements. Besides the standard configuration with a servo-motor directly connected to the gearbox, we can offer a more compact side-by-side positioning or a cam-shaft connection for a decentralized drive solution. Especially for large, bent tooling setups the use of an additional cam-shaft connection is recommended for improved maintenance purposes.
|EDC 810||560 mm||280 mm||4.500 kg|
|EDC 960||710 mm||310 mm||7.000 kg|
|EDC 1170||920 mm||360 mm||10.000 kg|