The rotary tables and trunnion drives of the EXPERT-TÜNKERS EDX series are precision indexer with fixed pitch and maximum torque. They are used for dynamic cycles of loads up to 20 tons. The drive takes place via an energy-efficient geared three-phase motor.
A characteristic of EDX Series rotary tables is the fact that the dial plate is continuously driven by two cam followers. In addition, this double meshing of the roller pins ensures virtually zero-backlash locking of the turntable plate in the operating position. Alternatively, this can be achieved by widening the zero position.
The indexing positions of the rotary table are defined in the motion profile specified in the indexing cam. Most common, partitions are 2-stop = 180°, 3-stop = 120° and 4-stop = 90°. Individual solutions are available on request.
Typical applications for EXPERT-TÜNKERS turntables are, for example, the change of work pieces in body shop welding systems, the insertion and removal of work piece carriers, or as a turntable for clocked work sequences in series production. The EDX Series of rotary tables are not only suitable for conventional use as rotary tables but also as trunnion drive units with a horizontal axis of rotation. These trunnion systems can provide several tooling’s for flexible production lines.
The EDX Series of rotary tables are not only suitable for conventional use as rotary tables but also as trunnion drive units with a horizontal axis of rotation. These trunnion systems can provide several toolings for flexible production lines.
As an optional accessory for our EDX-Series we can offer you our SmartTurn control unit.
The perfect media transmission solution for continuous rotating indexers is the EXPERT-TÜNKERS Slip Ring ETSR.
You are looking for a flexible rotary table wit freely programmable servo-gearmotor? Have a look at our EDH-series.
advantages of THE EDX-Series
- Low backlash, positive lock in operating position - no additional locking device required
- Higher output torque due to multiple cam follower principle
- Optimised power transmission to several cam followers at emergency stop
- Smoth and impact-free motion sequence due to specific law of motion
- Maintenance friendly - Cam follower exchange without tooling removal
EDX | Technical Specifications
|EDX 610||360 mm||250 mm||1.500 kg|
|EDX 700||450 mm||310 mm||3.000 kg|
|EDX 810||560 mm||360 mm||4.500 kg|
|EDX 960||710 mm||450 mm||7.000 kg|
|EDX 1170||920 mm||550 mm||10.000 kg|
|EDX 1370||1.120 mm||620 mm||15.000 kg|
|EDX 1600||1.350 mm||720 mm||20.000 kg|